People are readily installing ducted networks in their homes nowadays. It has become the necessitous ingredient of a house. In ducted systems, the whole network is concealed under the roof of your house. It is not extended outdoors. Therefore, it is unnoticeable from the outside. In addition to this, the network is not visible even from inside a house. We can only see vents. This ducted network then facilitates the entire house.
If we want to renovate our home and extend it outwards, we will have to expand our ducted network. We can slit open our two vents off of one duct.
Benefits Of Ducted Systems:
Ducted systems have a lot more benefits. Ducted systems are easier to use. Mainly in our houses, we install ductless splits. But in our commercial areas, we use ducted air conditioning systems. As the name shows, the whole system is integrated. We have a large central unit at one end, which provides all the services, whether they are cooling, heating, or drying.
Furthermore, all ducted systems have a central unit. The type of central unit differs according to the ducted system installed. We will take examples of air conditioning systems for better understanding.
- Since a ducted network is installed throughout the building, it costs less. A Split network costs more as we have to install its outdoor units and indoor units. Ducted networks immensely reduce the installation costs.
- Secondly, the ducted network is invisible and unobtrusive. Therefore it completes the look. It gives aesthetic pleasure to one. At the same time, the split system does not offer it.
- Furthermore, a ducted network removes moisture from the area efficiently as compared to a ductless system. If you live in a place with damp weather conditions, you should undoubtedly choose this system.
- Lastly, the most crucial benefit of this system is that it provides enhanced airflow to larger spaces with a lot of paper at a significantly less cost. For this reason, it is primarily used in commercial areas.
At last, if you have installed a ducted system in your building, it would be best if you took care of your system. Please ensure that you clean your ducts twice a year. You can either search for air duct cleaning in Norcross or clean these ducts at home.
How To Add Vents In The Already Existing Duct Network:
We can add as many vents to our duct. But first of all, we have to make sure that our central unit can perform and bear more load. If your system is capable of performing at a heavy load, you can add vents. Here you can learn to split two vents off of one duct.
Also, If your ducts are worn out, and you want to add more vents, then it is the best time to replace them. You can replace the ductwork between the floors in your commercial building. Additionally, you can return your duct network in homes as well.
Which Tools You Are Going To Split two vents off of one duct:
You will need the following tools to add vents to your ducts:
- Face mask to cover your face from dust and dirt particles
- Gloves to protect your hands
- Glasses or goggles
- Screws and screwdrivers
- Drill to make holes.
- Colored pen and scissor
- Metal clippers and shears
After you have gathered all the tools, follow the below-mentioned instructions:
Search For The Spot:
First, you need to wear gloves and goggles before starting the procedure. Make sure to cover your bare skin. Afterward, locate the spot of the duct network where you want to add your outlet or vent. Mark this place with your marker.
Remove The Marked Duct:
You need to remove enough portions of the duct. Label the area you are going to cut with the marker. Cut a big hole, and then insert your metal shears into it.
Add Your Vent:
Make sure to cut the hole in the template according to the size of the vent. If the hole is too big, your vent would fit loosely in it. And if your spot is smaller than the size of your vent, it will compress it. Either way, your vent won’t fit perfectly.
Cut The Neutralizing Padding Around The Hole:
Now you need to cut the insulation which is surrounding the hole. Use your scissors to cut the insulation. It is cut to define the size of the hole perfectly. Now put the vent again to check the fitting of the vent into the hole.
Drill The Holes:
Now to secure the position of the vent in the duct, cut the holes at the right place by taking the correct measurements. Drill slowly into the duct, so you don’t damage the entire duct.
Fasten Your Vent By Using Screws:
Use nuts to screw the vent to the duct. Make sure to use the nuts of the perfect size. Tighten your screws around the vent and check everything carefully.
Conclusion:
In conclusion, we can say that ducted networks have more pros than cons. For commercial use, this system is ideal. Moreover, we can add vents of our desired number in the duct. We can also split the duct into additional vents. It is an easy process. One can quickly do it at home.